What is the issue?Accurately marking out a square line on a round object and then cutting it is not a simple task. It is far more likely to go wrong than right.
Why address this?With this type of cut, you don’t typically get a second chance and getting it wrong can be prohibitively expensive.
How to address this?Roll a square sheet of paper around the object. Square it up until it meets evenly then mark off the line to cut.
Saw in with shallow cuts around the line, piece by piece, constantly rotating the object. Cutting down from one side will be unlikely to produce a straight cut.
With thanks to:Michael Harpur, Yacht Obsession.
Print this tip
Add your review or comment:
Please log in to leave a review of this tip.
Footsteps makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.