England Ireland Find Havens
England Ireland Find Routes
Boat
Maintenance
Comfort
Operations
Safety
Other



Next Previous

A simple way to keep crockery secure and quiet



1 comment

What is the issue?
A boat in motion is not a friendly habitat for crockery. It needs to be stowed in secure and tailored seats to prevent it falling about and breaking. These seats need to be a snug fit that is tailored to the specific crockery aboard. Otherwise, the crockery will slide and shuffle about creating an irksome noise below decks.

Why address this?
On a long rolling leg the rhythmic noise caused by the crockery sliding about can be hard on the nerves, particularly for the off-watch crew who are trying to rest down below. Securely stored crockery will also provide a lifetime of service.

How to address this?
The simplest technique to tailor fittings for a specific set of crockery is the traditional peg and board approach.

Simple 'dowel and pegboard' method of storing crockery
Photo: Michael Harpur


All that is required is a small saw, and a drill and wood bit sized to suit an accompanying dowel rod. Then it just takes a short amount of time to create a board that keeps crockery snug fitting, secure and quiet.

With thanks to:
Michael Harpur, Yacht Obsession.
A photograph is worth a thousand words. We are always looking for bright sunny photographs that illustrate this experience. If you have some images that we could use please upload them here. All we need to know is how you would like to be credited for your work and a brief description of the image if it is not readily apparent. If you would like us to add a hyperlink from the image that goes back to your site please include the desired link and we will be delighted to that for you.



Add your review or comment:

Lee Gunter wrote this review on Jan 6th 2018:
Tins in the locker rolling around make sleep nearly impossible. Wrapping them with perforated plastic matting not only stops the noise and is cheap, it also does not hold water/moisture against the tin/can but also prevents rusting. In the galley, all types of noise can be stopped/eliminated by using this inexpensive and re-useable product.

Average Rating: *****

Please log in to leave a review of this tip.

eOceanic makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.