England Ireland Find Havens
England Ireland Find Routes
Boat
Maintenance
Comfort
Handling
Safety
Other

NextPrevious

Getting in without power or wind by heaving buckets


Be the first to comment

What is the issue?
If you are becalmed and have an engine failure the vessel is effectively helpless and other means of propulsion are required to get the vessel in.

Why address this?
Apart from being a personal inconvenience the vessel could be impeding a busy waterway or be in danger as a result.

How to address this?
Use a strong bucket with two metres of line. Cast the bucket into the water to gain purchase on the water and pull the boat along.
The best approach is to run the coil through the bow of the boat. Break the coils into two and then cast the bucket as far as you can. Run back along the deck pulling the line in the fairlead until the slack is taken in. Then repeat the process. Steerage on a drift can be achieved by throwing buckets to the side of the vessel. Heavier or larger vessels may take several buckets to move them. Breaking can be achieved by doing this process in reverse.

It is less than quick and very hard work but at least you can do something.


With thanks to:
Michael Harpur, Yacht Obsession.

Print this tip

Add your review or comment:

Please log in to leave a review of this tip.

Footsteps makes no guarantee of the validity of this information, you must read our legal page. However, we ask you to help us increase accuracy. If you spot an inaccuracy or an omission on this page please contact us and we will be delighted to rectify it. Don't forget to help us by sharing your own experience.